Consumer Packaging Adhesives for Cartons, Bags & Cups
Hub for food-packaging adhesive programs: folder-gluer cartons, paper bags and sacks, cup seams, cold-chain case sealing, food-contact documentation, and peelable tray closures. Factory-direct qualification—1 kg lab screen → line trial → bulk supply.
Pick your application below—or share substrate, line speed, and compliance needs for a faster route.
6 Programs
Carton, bag, cup, EOL, food-contact, reopenable tray
1 kg → 20 kg
Lab screen then line trial before bulk MOQ
TDS + DoC
Technical Data Center and audit packages on request
WB + HM
Water-based and hot-melt routes by station
Choose Your Application
Each program has dedicated specs, compliance path, and sample workflow matched to that bond station.
Folding Carton Adhesives
UV, BOPP, and coated board on folder-gluers—side seam and auto-bottom grades; qualify pop-open and char on your line.
Paper Bag & Sack Adhesives
Handle, bottom, and seam bonds on kraft and multi-wall sacks—fiber-tear targets on your paper grade.
End-of-Line Packaging
Case sealing and tray forming hot melts for food logistics—cold-chain grades to about -40°C on qualified programs.
Food Contact Adhesives
FDA 175.105 vs 176.170 routes, migration screening, and audit paperwork for direct and indirect paper packs.
Paper Cups & Bowls
Side seam and bottom cup glue—not barrier coating. Hot-fill qualification on aqueous and lined cup stock.
Reopenable Food Packaging
Peelable PSA for bagasse and wood-fiber trays—coat-dry-store-bond-later; not permanent white glue or hot-melt lock-up.
Custom Closure Challenge
Unusual coated stock, tray rim, or multi-layer bond? Share geometry and we will suggest a qualification path.
Why Packaging Teams Start at This Hub
Six commercial programs, clear regulatory routing, and qualification data by application—not one generic “packaging glue” list.
Right Program, Right Page
Compliance by Structure
Qualify Before Bulk
Technology Platforms Behind These Programs
Match water-based, hot-melt, or aqueous barrier technology to the bond station—not one chemistry for every pack.
Water-Based Adhesives
Carton, bag, and cup forming grades—repulpable options where fiber recovery matters on qualified lines.
Hot-Melt Adhesives
Case sealing, tray forming, and wrap bonds—metallocene and EVA routes after line audit.
Aqueous Barrier Coatings
Water-based cup and foodservice barrier programs—separate from seam adhesive; Senda does not supply PE/PLA extrusion linings.
Factory-Direct Supply & Technical Screening
Source manufacturer for regulated packaging lines: batch documentation, substrate-matched grades, and chemist support when your line needs tuning—not generic reseller listings.
- Consistent batches with TDS and SDS for the grade you approve—traceability when your customer audit requires it.
- Technical screening on your substrate and equipment—viscosity, open time, and peel targets before bulk supply.
Food-Packaging Documentation Support
Regulatory fit depends on application and pack structure. We provide TDS, SDS, and compliance statements for the grade you nominate—not a one-size compliance label.
Common Documentation Paths
Request an audit package when your customer or 3PL requires batch paperwork.
- FDA 175.105 (Indirect food-contact routes (cartons, cases, many bags))
- FDA 176.170 (Direct-contact paper routes (cups, straws—structure-dependent))
- REACH & RoHS (Statements on request for export programs)
Batch-level TDS, SDS, and compliance notes scoped to your nominated grade and application.
Senda helped us route carton pop-opens on UV board to the right side-seam grade—and kept compliance paperwork aligned with what our pharma customer actually asked for.
Technical Proof (Optional Reading)
After you pick an application above, use these for deeper reading—not a substitute for program-specific samples.
CASE STUDY Case Study: Pharma Folding Cartons on UV Board
How a converter moved from surface tack to fiber-tear on heavy UV varnish—side-seam qualification on a high-speed folder-gluer.
Read the Full Story
TECHNICAL GUIDE Guide: PSA Selection for Plastic Packaging
When your program touches film-laminated board or PSA closure zones—substrate energy and peel targets before you trial.
Read Full ArticleFrequently Asked Questions
Which page should I use for my application?
Use the application grid above: cartons → folding carton; bags → paper bag; cups → paper cups; case sealers → end-of-line; regulatory questions → food contact; peelable trays → reopenable food packaging.
What are MOQ, lead time, and samples?
MOQ is typically ~1,000 kg per approved grade. Lead time is often 7–10 business days. Start with complimentary 1 kg lab material (recipient prepaid shipping), then 20–25 kg line trials for that application.
Do you offer food-contact or FDA-route adhesives?
Yes—routes are matched to 175.105 (indirect) or 176.170 (direct) on your structure. Start on food contact adhesives for the decision tree, then the application program for commercial grades.
Can you bond UV-coated or laminated cartons?
Yes—see folding carton adhesives for UV, BOPP, and aqueous-coated board qualification on folder-gluers.
Is cup adhesive the same as cup coating?
No. Paper cups covers seam glue; aqueous barrier coatings for cup stock are under recyclable barrier. The cup page explains adhesive vs coating vs heat-seal.
Do you supply PE or PLA cup or tray linings?
No. Senda’s water-based barrier programs are on recyclable barrier. We qualify adhesives and peelable PSA on converters’ coated or lined stock—we do not sell PE/PLA lining film.
Where do I get TDS, SDS, or audit documents?
Use the Technical Data Center (`/technical-resources`) or request an audit package with your sample request.
Do you customize viscosity or set time for our machine?
Yes—share folder-gluer, bag line, cup mandrel, or case sealer specs for that application. Custom tuning is part of qualification, not a separate catalog SKU.
